Видео

Most welcome! and thanks for the comment

It is my favourite so far, it's not perfect but it is close

It's just a question of adjsting the tenshion on the arms

Have you watched this video ruclips.net/video/kZhCwWMwzbM/видео.html

Thanks. I couldn’t get this to work. The arms seemed almost locked in place.

@@nigelmcdonald They do not need a lot of pressure to push them up or down

@@YorkiesBitsandBobs I’ve managed to get them to stop moving, but now if they are the same height it’s too low for my eye line and there’s a huge gap in between them. Worth seeing with the manufacturer if they aren’t meant for top mounted monitors?

You do need a lot of force to push them down

You should be able but not sure about bitlocker

Thank you, I’ll order another external ssd enclosure and report back

@matthealy563 I'm looking forward to it

Glad I could help! thanks for the feedback

Thanks for the comment, mine broke so now I have a completely different one

It works just fine for me but thanks for the info

It works just fine for me but thanks for the info

The trouble is there will be people out there that what more info

@@YorkiesBitsandBobs it's not the length per se - it's just so verbose and flabby. Needs to be far better planned what is going to be said and delivered without all the pointless additional chat and procrastination.

Thanks for the advice, I will try harder

@@hartleyjr Thanks I will work on it

Thats the word I was looking for, thanks

Welcome aboard!, and thank you

They sound fine to me and your the first one to complain

@@YorkiesBitsandBobs these are dog shit

You too mate

That sounds like a good plan

​​​@@YorkiesBitsandBobs I would probably recommend OpenSpeedTest as its the quickest and easiest to setup

No, why ould you need one?

Yes it is and thank you for the comment

Sorry, JustSullyy No it's not working I have just released a new video of a new and better one ruclips.net/video/5MMvSwA-H4k/видео.html

Works for some

Thanks for the feedback I'm glad to help

Lol Nice one

Thanks for sharing!, I agree with you

Yes it works 24/7

I have in some of the video

You're welcome! Thanks for the comment

Editing at 60fps is very high

It should

Thanks for the comment

Thank you for the comment DanSn0w

Thank you for thefeedback polax2121

Sorry jeffersonspyplanemusic I don't know

It might be the HDMI cable can you try adifferent one? Verify that your TV has at least one HDMI input that supports HDCP 2.2.

@@YorkiesBitsandBobs sorry I should have clarified this is when am using the hdmi port on the horlat projector

It's to do with HDCP 2.2 I'm not sure how you get around it but I have been told that there is a away to do it, message Horlat they might be able to help you

Motherboard: ATX, ITX, Micro ATX

Wow! Thank you very much Shir_lley

Thank you Shir_lley for the feedback

Sorry, I've not tested that one so I'm sure, is there no recess on the right side?

@@YorkiesBitsandBobs Thanks for replying. I have now found that you open a flap at the front-it hinges downward. Then you can lift the top up to get access. Thanks again.

@@joshua6244 Your welcome

Thanks Dave for the comment

@@YorkiesBitsandBobs bought these for my daughter - she loves them 👍

@@thedaveevans Nice one and thanks for the feedback

The software that conecs to your phone is wireless

@@YorkiesBitsandBobs Ah right, ok. Thanks 👍🏻

I think so

No it needs to be Hardwired for permanent power

@YorkiesBitsandBobs thanks for the reply. However, Super capacitor has nothing to do with hard wiring. Probably you don't know about it. Inside of every dash cam there is a small battery or super capacitor to keep the cam alive for a few seconds after the engine is turned off. Anyway thanks

Also, a dash cam doesn't need to be hardwired. You can also plug it into the cigarette lighter. But the 24 parking mode will not be activated

@@pubudunawarathna Thanks for the info, your best bet would be to ask the seller or the manufacture

I did. I was informed that it doesn't have a super capacitor. So all the dash cams with a battery have a possibility to be damaged by winter cold and summer heat. That's why I was looking for a dash cam with a capacitor with this price range. So the camera can last a long time.

Thanks for the feedback James670 I'm glad I helped you

It gets warm

Thanks for the comment Insectoid_

@@YorkiesBitsandBobs hope things are going ok 😊 Bug 🐞

@@Insectoid_ All good mate I need to do some updates for you all

I have a picture for you I hope it helps drive.google.com/file/d/1802jGRwM4bEYqhYsPdCwZ9rORr1KWhad/view?usp=sharing

Thank you for the feedback

Are you happy with it?

@@YorkiesBitsandBobs Got it from Cash Converters and they didn't send the USB receiver for the mouse. Also, didn't send the original USB C cables and standard ones don't power either the keyboard or mouse....

@@Northman_Roams First of it sounds like you are using the wrong power connection to send power or the wrong cable . The USB receiver works on both devices it might need reconnecting to the USB receiver, check this video out ruclips.net/user/shortsX_tELebR4ZI?feature=share

@@YorkiesBitsandBobs Yeah, trying to find out what Amps the original Red Thunder USB C cables used. Ordered a cheap 100W/7Amp cable from Amazon so will see if that does the job. I physically don't have the USB receiver as the shop I got it from have "Lost it".

@@Northman_Roams let me know how you get on please

Hello, user-rr7ce3pg5q no sorry

Sorrty, I don't have it anymore

Thank you for sharring lms196506 I'm gad it worked for you

Sorry SergioFLiso not sore but I think they are 4m but you should contact Invisison i'm sure they will help. here is a list of standered sizes. VESA STANDARD HOLE PATTERN SCREW SIZE MONITOR WEIGHT FDMI MIS-B 50 x 20 mm M4 x 6 mm ≤ 4.4 lbs / ≤ 2 kg FDMI MIS-C 75 x 35 mm M4 x 8 mm ≤ 10 lbs / ≤ 4.5 kg FDMI MIS-D 75 x 75 or 100 x 100 mm M4 x 10 mm ≤ 30.8 lbs / ≤ 14 kg FDMI MIS-E 200 x 100 mm M4 x 10 mm ≤ 50 lbs / ≤ 23.7 kg FDMI MIS-F 200 mm increments M6 x 8 mm or 10 mm; M8 x 15 mm ≤ 250 lbs / ≤ 113.6 kg